F1 COMPOSITE — FRP CABLE TRAY & CABLE LADDER RFQ CHECKLIST
Application guide: https://www.f1composite.com/applications/frp-cable-tray-supports
Contact: https://www.f1composite.com/contact
Revision: 2026-09-21

Start with your name and email. Drawings and technical details can follow.

1. CONTACT
Name:
Email:
Company / project:

2. SUPPLY SCOPE
Raw profiles / cut-and-drilled parts / fabricated supports / complete tray system:
Engineering and installation responsibilities:

3. ROUTE AND CABLES
Tray type (ladder / ventilated / solid bottom / covered / trunking):
Usable width and loading depth / ladder rail depth:
Tray: solid or ventilated base, opening pattern, base and wall thickness:
Ladder: rung spacing, rung profile and cable restraint requirements:
Straight-section length (separate from support span):
Route length and drawing reference:
Cable schedule, mass per metre and future allowance:
Minimum cable bend radius:
Bends, tees, crosses, reducers and risers:
Dividers, covers, cover clamps and cable cleats:

4. SUPPORTS AND LOADS
Support spacing and end-span arrangement:
Wall / suspended / floor-mounted supports:
Bracket projection and supporting structure:
Point loads, installation loads and site actions:
Deflection requirements:
Anchor, hole pattern and hardware requirements:

5. ENVIRONMENT AND ACCEPTANCE
Chemicals, concentration and exposure mode:
Operating temperature range:
UV / coastal / washdown / other exposure:
Governing standards and editions:
Required fire, smoke and toxicity evidence:
Electrical bonding, segregation and short-circuit requirements:
System load test, certification and inspection documents required:

6. DELIVERY
Quantity:
Destination:
Required date:
Transport length limits, kit marking and packing:

Confirm the offered scope, configuration and supporting documents in the quotation.
This checklist is an enquiry aid, not a design approval or a system certification.