FRP profile finder
Filter the standard pultruded profiles by shape, size, mass and stiffness. Tick up to four sizes to compare them side by side, then send them for one quotation.
- Catalog sizes
- 114
- Shapes
- 8
- Mass
- 0.05–16.8 kg/m
Rows use each section's default material dataset. Material values are references unless an applicable report is identified; availability needs engineering confirmation. Internal catalog references are website IDs, not manufacturer SKUs.
Filters · 1 active
9 of 114 sizes
I 76×38×6.4
I-beam
- kg/m
- 1.2
- Ix cm⁴
- 72.5
- Wx cm³
- 19.1
I 100×50×6
I-beam
- kg/m
- 1.6
- Ix cm⁴
- 166.8
- Wx cm³
- 33.4
I 120×60×6
I-beam
- kg/m
- 2.0
- Ix cm⁴
- 297.1
- Wx cm³
- 49.5
I 152×76×6.4
I-beam
- kg/m
- 2.9
- Ix cm⁴
- 659.8
- Wx cm³
- 86.8
I 160×80×8
I-beam
- kg/m
- 3.6
- Ix cm⁴
- 939.1
- Wx cm³
- 117.4
I 200×100×10
I-beam
- kg/m
- 5.8
- Ix cm⁴
- 2,293
- Wx cm³
- 229.3
I 240×120×12
I-beam
- kg/m
- 8.4
- Ix cm⁴
- 4,754
- Wx cm³
- 396.2
I 300×150×15
I-beam
- kg/m
- 13.5
- Ix cm⁴
- 11,610
- Wx cm³
- 773.8
I 305×305×12.7
I-beam
- kg/m
- 16.0
- Ix cm⁴
- 18,870
- Wx cm³
- 1,237
Reading the table
What the values are
Mass is the published catalog value. Area, Ix and Wx are calculated for the nominal section with sharp corners, so they differ slightly from a section with radii. D is the depth, leg, outside diameter or bar width; B the flange width or second leg; t the wall or flange thickness.
Checking a span
Deflection usually decides an FRP size. Open a size in the profile calculator or read its row in the span tables.
No size fits
New cross-sections are pultruded to your drawing. See custom pultruded profiles for tooling, samples and minimum runs.
Send the sizes you shortlisted for one quotation
Send the sizes, lengths per piece, quantities and resin or color requirements. We reply within one business day.