Skip to content
Engineering evidence

Find the document that matches your product

F1 Composite publishes 13 original documents: SGS full-section modulus tests of 40.8 and 41.5 GPa, a Passive House Institute window certificate at Uw 0.78 W/(m²·K), Intertek AS 2047 window and door reports, TÜV Rheinland and CPVT PV frame reports and an SGS UL 94 V-0 material test. Each result applies only to the item named in the document.

Last updated

Reported results at a glance 9 reports

One row per test report or certificate, as printed in the original. A result covers the tested specimen or stated configuration only. It is not a design allowable or a certification of other products.
Results reported in F1 Composite's published test reports and certificates
DocumentTested itemMethodReported resultDate
SGS SHIN2608002943CM01_ENSquare tube sample; the report lists specification 60605 and specimen 2160 × 90 × 90 mmEN 13706-2 Annex D, 1,800 mm spanFull-section modulus 40.8 GPa, mean of three specimens (41.2, 41.1, 40.1)Issued
SGS SHIN2608002943CM02_ENSquare tube sample; the report lists specification 90905 and specimen 1440 × 60 × 60 mmEN 13706-2 Annex D, 1,200 mm spanFull-section modulus 41.5 GPa, mean of three specimens (41.1, 42.1, 41.3)Issued
Passive House Institute 2491wi03Fengdu Passive GFRP 90 Series window framePHI component certificate, cool-temperate climateUw 0.78 W/(m²·K) with Ug 0.70 W/(m²·K); efficiency class phBValid until
Intertek 240821010SHF-00180 Series turn-and-tilt window, 1200 × 1800 mmAS/NZS 4420.1-2016 test sequence against AS 2047-2014 (Amdt 2-2017)Results met the applicable AS 2047-2014 requirements, as concluded in the reportIssued
Intertek 240821010SHF-002Historical 140 Series lift-sliding door, 3000 × 2400 mmAS/NZS 4420.1-2016 test sequence against AS 2047-2014 (Amdt 2-2017)Results met the applicable AS 2047-2014 requirements, as concluded in the reportIssued
Wuxi / CPVT 2025DACS20319Composite PV module frame, all-weather modified resinMethods listed for each property in the reportMean tensile strength 1,310 MPa; flexural strength 1,060 MPa; flexural modulus 48.0 GPa; HDT above 290 °C; flammability V-1. No pass/fail assessment.Issued
TÜV Rheinland CN24KZ3A 002GFF-series polymer composite PV frames with Jotun Jota Solar CL coating2 PfG 2923/11.22, coating-change clausesPass, as stated on the report cover. Other clauses refer to CN24KZ3A 001.Issued
TÜV Rheinland CN24KZ3A 003GFF-series polymer composite PV frames with B9986S polyester coating2 PfG 2923/11.22, coating-change clausesPass, as stated on the report cover. Other clauses refer to CN24KZ3A 001.Issued
SGS GZMR260702529004Composite profile material E-TS-AB, 10.1 mm longitudinal specimensUL 94-2023 Rev.2-2024, Section 8 (vertical burning)V-0 at 10.1 mm. Report marked for internal reference.Issued

Intertek and TÜV Rheinland rows give the conclusion printed in each report, because both laboratories restrict partial reproduction. Open the complete report for the measured values. Data sheets and the window catalog are listed below but not tabulated.

All documents 13 documents

Confirm the certificate holder, product or specimen, report number, method, date and scope. EN 13706 and ASTM D3917 are specification references, not proof of blanket certification. CE/UKCA documentation depends on the product, intended use and applicable assessment route. The original document controls its holder, issue date, validity and scope. Each test report and certificate has a verification page naming its holder, the issuer's own check and the SHA-256 of the published file. For material or batch-specific records, request the applicable evidence.

13 documents

Test report · SHIN2608002943CM01_EN

E40 evidence — SGS full-section test, 40.8 GPa

SGS SHIN2608002943CM01_EN, issued 2026-09-07: full-section test to EN 13706-2 Annex D, 40.8 GPa average from three specimens. Page 1 specification 60605; page 3 specimen 2160 × 90 × 90 mm. These size identifiers need clarification before size-specific qualification. Results apply only to the tested samples; conclusion N/A, with an internal-reference use note. Supports the reported 40 GPa-class result, not EN 13706 E40 certification or a design allowable.

Open document (PDF)Verify this documentRead test results and scope notesSquare and rectangular tubesCheck applicability to my project

Test report · SHIN2608002943CM02_EN

E40 evidence — SGS full-section test, 41.5 GPa

SGS SHIN2608002943CM02_EN, issued 2026-09-07: full-section test to EN 13706-2 Annex D, 41.5 GPa average from three specimens. Page 1 specification 90905; page 3 specimen 1440 × 60 × 60 mm. These size identifiers need clarification before size-specific qualification. Results apply only to the tested samples; conclusion N/A, with an internal-reference use note. Supports the reported 40 GPa-class result, not EN 13706 E40 certification or a design allowable.

Open document (PDF)Verify this documentRead test results and scope notesSquare and rectangular tubesCheck applicability to my project

Component certificate · PHI 2491wi03

90-series GFRP window component certificate

PHI 2491wi03 names Chongqing Xianju New Material Co., Ltd. and Fengdu Passive GFRP 90 Series. The stated configuration is cool-temperate, efficiency class phB, Uw 0.78 W/(m²·K) with Ug 0.70; valid until 31 December 2026. It is not Arctic-climate, PHIUS or blanket F1-window certification. Confirm the original and proposed configuration.

Open document (PDF)Verify this documentFRP windows and doorsCheck applicability to my project

Technical reference · DOC-PF-2026-EN Rev. B

FRP profile design manual

Revision B (October 2026), generated from the website's catalog, laminate and design-basis data: EN 13706 E23 laminate values beside the grade minimums, section properties of all 114 catalog sizes, allowable uniform loads to the published LRFD screening basis, application guides, durability stated by resin formulation, fabrication and inspection. A preliminary-sizing reference, not a project approval or batch certificate; it supersedes the withdrawn Rev. A.

Open document (PDF)Structural shapesCheck applicability to my project

Technical reference · Window and door catalog

Pultruded FRP window and door catalog

Nine-series purchasing reference: 50, 55, 60, 65, 70, 80, 90 casement, 90 sliding and 140 compression-seal sliding. Covers separate profile and finished-unit procurement paths, updated profile codes and configuration-specific evidence boundaries. Confirm drawings, glazing, hardware and supply scope at quotation.

Open document (PDF)FRP windows and doorsCheck applicability to my project

Test report · Wuxi / CPVT 2025DACS20319

PV module frame material test report

Composite PV module frame in all-weather modified resin: mean tensile strength 1,310 MPa, flexural strength 1,060 MPa, flexural modulus 48.0 GPa, HDT above 290 °C and flammability V-1, with UV, damp-heat, humidity-freeze, thermal-cycle, salt-mist and ammonia exposure results. The report gives measurements without a pass/fail conclusion, and its salt-mist cycle count and duration are inconsistent.

Open document (PDF)Verify this documentRead test results and scope notesSolar mounting and PV framesCheck applicability to my project

Test report · TÜV Rheinland CN24KZ3A 002

PV frame coating test report: Jotun Jota Solar CL

GFF-series PV frames with Jotun Jota Solar CL coating, tested to the coating-change clauses of 2 PfG 2923/11.22 with a Pass result stated on the cover; other clauses refer to CN24KZ3A 001. TÜV Rheinland does not permit reproduction in extracts without its approval, and the report does not authorize a test mark.

Open document (PDF)Verify this documentRead test results and scope notesSolar mounting and PV framesCheck applicability to my project

Test report · TÜV Rheinland CN24KZ3A 003

PV frame coating test report: B9986S polyester

GFF-series PV frames with B9986S polyester coating, tested to the coating-change clauses of 2 PfG 2923/11.22 with a Pass result stated on the cover; other clauses refer to CN24KZ3A 001. TÜV Rheinland does not permit reproduction in extracts without its approval, and the report does not authorize a test mark.

Open document (PDF)Verify this documentRead test results and scope notesSolar mounting and PV framesCheck applicability to my project

Need evidence for a specific product?

Send the product, configuration and the document your project requires. We reply within one business day.

Request a quoteWhatsApp
Get a quoteWhatsApp