Australian buying guide

FRP grating Bunnings: compare your options

Searching for FRP grating at Bunnings? Compare retail floor panels with fibreglass grating for walkways, platforms and project supply. Choose the material, support layout and buying route that fit your job.

Green moulded square-mesh and yellow pultruded FRP grating samples — F1 Composite · FRP grating
Two constructions. Select the panel around its supports, loads and exposure.

Choose: Moulded or pultruded
Specify: Panels, cuts & clips
Deliver: Quote by postcode

First, check what the panel is made from

An open grid can be made from different materials. Match the product and its installation data to the job before comparing price.

The Matrix Fast Floor listing at Bunnings is a retail floor-panel option. Matrix describes its ground panels as recycled plastic. F1 supplies glass-reinforced grating, with the construction and resin selected for the project.

Use this comparison to decide which product information to request. It is not a claim that either panel can replace the other in an existing installation.

Matrix Fast Floor at Bunnings compared with F1 project-specified FRP grating
Compare	Matrix Fast Floor / retail route	F1 FRP grating / project route
Material	Matrix ground panels are described by the supplier as recycled plastic.	Glass fibre reinforcement in a resin matrix; choose moulded mesh or pultruded bearing bars.
Starting use	The Bunnings Fast Floor listing describes shed, storage and vehicle parking areas on a prepared flat surface.	Walkways, platforms and access areas selected around the actual support layout and service conditions.
Panel selection	The linked Fast Floor product is listed at 1200 × 400 × 40 mm. Follow its own installation instructions.	Select panel geometry, mesh or bar spacing, depth, surface and a cut plan from the grating range.
Loads and supports	Confirm suitability for your intended installation with the product supplier.	Request load and deflection data for the chosen panel, clear span, load footprint and bearing direction.
Buying route	Check the retailer for current price, local stock and collection or delivery.	Request a project quotation covering panels, fabrication, clips, packing and delivery to Australia.

Retail references checked 25 October 2026. This comparison concerns the linked products, not the full Bunnings range. Check current specifications, stock and pricing with the retailer.

Choose your FRP grating construction

Once your job calls for glass-reinforced grating, use the product pages for current configurations and selection data.

Yellow molded fiberglass grating panel with a square mesh

Mesh panelsMoulded FRP gratingStart here for platforms with frequent cutouts or layouts requiring support in both directions. Compare square mesh and mini mesh against the opening and access requirements.Square & mini meshCut plans & fixing clipsCompare panel specifications

Yellow pultruded fiberglass grating with I-bar bearing bars and cross rods

Bearing-bar panelsPultruded FRP gratingStart here when the main span direction is defined. Compare I-bar and T-bar configurations, and align the bearing bars with the designed span before checking load data.I-bar & T-bar configurationsDirectional load pathCompare panel specifications

Planning a complete access system? Review stair treads, handrails and the grating selection guide together with the support frame.

Four details that make the quote useful

For a wet walkway, a coastal access platform or a maintenance area, start with the site conditions and a dimensioned layout.

Panel dimensions & openings

Supply panel length, width, clear openings and any cutouts. Mesh designation and bar centres are not the clear opening.

Span, load & deflection

Include support spacing and width, distributed or point loads, load footprint and allowable deflection. Thickness alone does not establish capacity.

Resin & exposure

State chemicals, concentration, temperature, salt spray and sunlight exposure. Match the resin and surface protection to the service environment.

Walking surface & fixings

Identify wet use, footwear, grit or other finish, clip kits and supporting frame material. Request test evidence for the proposed configuration.

Need help turning your layout into a panel schedule? Use the grating planner, then request the applicable load tables and supporting documents.

Build a panel schedule

FRP grating price: compare the complete supply scope

A retail panel price and an export quotation cover different things. Compare the cost of the finished area with the same installation assumptions.

Panels & fabrication: Construction, resin, depth, surface, order quantity, cutting, cutouts and edge treatment.
Fixings & supporting work: Clip kits, support-frame requirements, installation access and the usable area after cutting waste.
Packing & delivery: Packed dimensions, freight scope, destination charges, applicable taxes and unloading arrangements.

Minimum order, production timing and freight are confirmed for your requirement. A small urgent order may be better served by an available local retail product, subject to its suitability.

FRP grating Bunnings: buying questions

Does Bunnings sell FRP grating?

The Bunnings product linked here is Matrix Fast Floor; the Matrix supplier describes its ground panels as recycled plastic. That listing does not establish availability of glass-reinforced FRP grating across the retailer's range. Check the exact product material, your local store and current availability directly with Bunnings.

Is Matrix Fast Floor the same as fibreglass grating?

The linked Matrix ground-panel range is described as recycled plastic. F1's FRP or GRP grating uses glass fibre reinforcement and resin in a moulded grid or pultruded bar assembly. Compare the specific products and their installation data before choosing; a similar open-grid appearance does not establish equivalent performance.

Is FRP grating cheaper than Bunnings flooring?

There is no useful price comparison without matching the application and scope. Compare total usable area, required supports, cutting waste, fixing kits, freight and installation. Ask F1 for a written project quotation and check the current retailer price separately.

Can I use FRP grating for a shed floor or vehicle parking?

Describe the base and whether the panel will span between supports. Vehicle wheels create concentrated loads; a pedestrian grating selection is not a vehicle rating. The selected panel and supporting structure need applicable load data and design review before use.

Can I order cut-to-size panels or a small quantity?

Send the dimensions, cutouts and number of panels, even for a small requirement. Cutting scope, minimum quantity, sample arrangements and delivery cost are confirmed in the quotation. For an immediate retail purchase, check local availability with the retailer.

Do you supply Australian projects?

Yes. Submit your delivery suburb, state and postcode with the panel schedule. Mason Liu is F1 Composite's Australian contact in Gold Coast. Supply is through F1's China production network; freight terms and delivery timing are confirmed per order.

Does F1 grating automatically meet Australian project requirements?

No generic material label establishes compliance. Provide the project's structural, slip, fire and access requirements and request evidence matching the proposed panel, resin, surface and installation. The project designer should assess that evidence before approval.

Is F1 Composite affiliated with Bunnings or Matrix?

No. F1 Composite is an independent FRP supplier. Bunnings and Matrix names identify the retail products discussed in this buying guide; they do not imply affiliation, approval or a distribution relationship.

Turn your grating search into a project quote

Send your panel schedule or a sketch, the service conditions and an Australian delivery postcode. We reply within one business day; a formal quotation follows once the specification and delivery are reviewed.

Request my grating quote WhatsApp

Panel type and size: Molded mesh or pultruded series, depth, and panel sizes or a cut plan with panel marks.
Span and loads: Clear span, support width, uniform and point loads, deflection limit and bearing-bar direction.
Service and surface: Chemicals and temperature, resin, walking surface, and any fire or slip-test requirement.
Fixing and delivery: Clip kits, quantity or total area, destination port or postcode and the required date.