FRP profile finder
Filter the standard pultruded profiles by shape, size, mass and stiffness. Tick up to four sizes to compare them side by side, then send them for one quotation.
- Catalog sizes
- 114
- Shapes
- 8
- Mass
- 0.05–16.8 kg/m
Rows use each section's default material dataset. Material values are references unless an applicable report is identified; availability needs engineering confirmation. Internal catalog references are website IDs, not manufacturer SKUs.
Filters · 1 active
17 of 114 sizes
CHS 25×3
Round tube
- kg/m
- 0.3
- Ix cm⁴
- 1.28
- Wx cm³
- 1.02
CHS 32×3
Round tube
- kg/m
- 0.4
- Ix cm⁴
- 2.9
- Wx cm³
- 1.82
CHS 38×3.2
Round tube
- kg/m
- 0.5
- Ix cm⁴
- 5.34
- Wx cm³
- 2.81
CHS 42×4
Round tube
- kg/m
- 0.7
- Ix cm⁴
- 8.72
- Wx cm³
- 4.15
CHS 50×4
Round tube
- kg/m
- 0.9
- Ix cm⁴
- 15.4
- Wx cm³
- 6.16
CHS 50×5
Round tube
- kg/m
- 1.1
- Ix cm⁴
- 18.1
- Wx cm³
- 7.25
CHS 60×5
Round tube
- kg/m
- 1.3
- Ix cm⁴
- 32.9
- Wx cm³
- 11
CHS 63.5×6.4
Round tube
- kg/m
- 1.7
- Ix cm⁴
- 47.4
- Wx cm³
- 14.9
CHS 70×5
Round tube
- kg/m
- 1.6
- Ix cm⁴
- 54.2
- Wx cm³
- 15.5
CHS 76×6.4
Round tube
- kg/m
- 2.1
- Ix cm⁴
- 85.5
- Wx cm³
- 22.5
CHS 80×5
Round tube
- kg/m
- 1.8
- Ix cm⁴
- 83.2
- Wx cm³
- 20.8
CHS 80×7
Round tube
- kg/m
- 2.5
- Ix cm⁴
- 107.9
- Wx cm³
- 27
CHS 89×6.4
Round tube
- kg/m
- 2.5
- Ix cm⁴
- 142.5
- Wx cm³
- 32
CHS 100×6
Round tube
- kg/m
- 2.7
- Ix cm⁴
- 196.5
- Wx cm³
- 39.3
CHS 114×6.4
Round tube
- kg/m
- 3.3
- Ix cm⁴
- 314.2
- Wx cm³
- 55.1
CHS 127×6.4
Round tube
- kg/m
- 3.7
- Ix cm⁴
- 442.1
- Wx cm³
- 69.6
CHS 150×8
Round tube
- kg/m
- 5.4
- Ix cm⁴
- 902.4
- Wx cm³
- 120.3
Reading the table
What the values are
Mass is the published catalog value. Area, Ix and Wx are calculated for the nominal section with sharp corners, so they differ slightly from a section with radii. D is the depth, leg, outside diameter or bar width; B the flange width or second leg; t the wall or flange thickness.
Checking a span
Deflection usually decides an FRP size. Open a size in the profile calculator or read its row in the span tables.
No size fits
New cross-sections are pultruded to your drawing. See custom pultruded profiles for tooling, samples and minimum runs.
Send the sizes you shortlisted for one quotation
Send the sizes, lengths per piece, quantities and resin or color requirements. We reply within one business day.