Skip to content
Custom product inquiry

Fiberglass T Profiles

A pultruded tee combines a flange for attachment with a perpendicular stem for support or separation. F1 Composite reviews the flange width, stem depth, wall thickness and connections against your drawing before confirming a custom production scope.

FIG. 1 Fiberglass T ProfilesConcept diagram · not to scale
Schematic of fiberglass T profiles; conceptual geometry, not a production drawing
Flange and stem of a pultruded tee. Dimensions, wall thicknesses and radii are set by the approved section drawing.
Supply route
Project quotation
Configuration
Drawing review
Production release
After agreed qualification

Last updated

Discuss your specificationSelection detailsWhatsApp

Define the product for your assembly

Panel backing, longitudinal stiffeners, equipment frames and support ledges where one flange and one stem fit the available space.

Section geometry

Flange width and thickness, overall depth, stem thickness and internal radii. Specify symmetry or any intentional offset.

Support interface

Fastener positions, contact width, adhesive bond area and cutouts, with the supported panel or equipment identified.

Material and surface

Resin and reinforcement chosen for exposure and loading; surface veil, color and bonding preparation agreed in the specification.

Send the required configuration for review. The quotation confirms availability, production or sourcing scope, tooling, minimum order, documents and delivery. Performance values must come from the offered grade and assembly.

Resolve these checks before ordering

  1. CHECK 1

    Load path

    A tee is not symmetric about both axes. Identify the loaded flange, restraint and load eccentricity; bending, twisting and local flange behavior may need separate checks.

  2. CHECK 2

    Joint detailing

    Check bearing, pull-through, bond preparation and how the flange transfers force into the stem. A coupon strength is not a rated joint capacity.

  3. CHECK 3

    Tooling and samples

    Approve the section drawing and inspection plan before tooling. Review trial lengths for dimensions, straightness and assembly fit before the production run.

Fiberglass T Profiles: purchasing questions

Can a T profile replace a steel tee directly?

Replacement needs a new section and connection check using the proposed GFRP properties. Match deflection, stability and joint behavior as well as strength.

Can the flange and stem have different thicknesses?

Yes, this can be reviewed as a custom geometry. Tooling feasibility, reinforcement and corner transitions must be checked before a section is confirmed.

Review available product evidence →

Request Fiberglass T Profiles

Start with a drawing and the intended use. These details help define the proposed supply package and qualification plan. We reply within one business day; a formal quotation follows once the specification and delivery are reviewed.

Request a quoteWhatsApp
Dimensioned T-section and required length
Panel or frame assembly drawing
Span, load direction and connection details
Exposure, fire or electrical requirements
Annual demand, first order quantity and destination
Get a quoteWhatsApp