Equipment & tooling support
Equipment and tooling support within F1 Know-How & Services. Define production-line modules, tooling interfaces and acceptance trials as part of technology transfer or a production improvement project.
Equipment and tooling specifications 7 guides
Supplier image
Pultrusion Machines
Specify a pultrusion line around the profiles you plan to make. Review hydraulic or caterpillar pulling, resin handling, tooling and acceptance trials with F1.
Prepare a specification →
Supplier image
Pultrusion Dies & Tooling
Prepare a pultrusion die inquiry with the section drawing, resin system, reinforcement and line interfaces. Define tooling ownership, trial parts and acceptance.
Prepare a specification →
Supplier image
Resin Mixing & PU Injection
Compare batch mixing and metered resin injection for composite production. Define material compatibility, dosing, cleaning and the connection to the line.
Prepare a specification →
Pullwinding Equipment
Define a pullwinding line for composite tubes with longitudinal and wound reinforcement. Coordinate the mandrel, winding heads, resin system and pulling controls.
Prepare a specification →
Mat Slitters & Profile Cutters
Specify roll slitting and cured-profile cutting as separate production tasks. Review material handling, dimensions, line synchronization and cut-quality acceptance.
Prepare a specification →
SMC Production Lines
Prepare an SMC sheet-compounding equipment inquiry. Define resin paste, chopped reinforcement, carrier film, compaction and the interface with downstream molding.
Prepare a specification →
BMC & SMC Molds
Define matched tooling for BMC or SMC components. Review part geometry, compound, molding-machine interfaces, trial parts and the tooling handover package.
Prepare a specification →
From requirements to an agreed package
STEP 1
Product brief
Drawings, materials and output target establish what the line or tooling must produce.
STEP 2
Scope & interfaces
Identify the proposed manufacturer, supplied modules, buyer utilities, commissioning and support.
STEP 3
Acceptance & handover
Agree factory trials, site acceptance, documentation, spares and warranty responsibility.
Material qualification support →Build a connected Know-How project brief →Buy finished FRP products →
Send your project brief
Share the product drawings, planned output, factory location and existing equipment. F1 will review the requirements within the proposed Know-How engagement.